MULTI VOLT (36V) Cordless Rotary Hammer

DH36DPA

Fast Drilling Speed Equivalent to an Electric (AC) Model

Drills fast like an AC rotary hammer with a combination of the highly efficient brushless motor and high power output
MULTI VOLT battery.

  • Runtime per Charge
    120 holes *2
    With the BSL36A18 battery. When drilling into concrete with a ø8.5mm x 40mm drill bit.



  1. When fully charged with the dust extractor system detached. In comparison with the DH28PCY rotary hammer.

The performance depends on the workpiece material and operating conditions.

      2. The value is for reference purposes, and depends on the workpiece material and operating conditions.


More Lightweight and More Compact *1Same Power. Less Size.

  • The compact and lightweight MULTI VOLT battery enables a significant reduction in the overall size of the tools.
    *Compared to the DH36DBL cordless rotary hammer.


  1. Compared to the DH36DBL cordless rotary hammer.
  2. Without the dust extractor system, the DH36DPB has the same weight and size as the DH36DPA.

Ergonomic Design

  • 1: The grip of the handle and the drill bit head are on the same line of action, which makes applying force to drill easier.
    Pic.2: The grip of the handle is close to the center of gravity for easier handling.

 

  
Caution

Depending on operating conditions, the Reactive Force Control function may not work or may not provide the specified performance. Make sure that the workpiece is placed and supported
properly, and that the main unit is held firmly during operation.

 

Reactive Force Control  (RFC)

When the tool bit is suddenly overburdened during operation, the slip clutch disengages the gears or the tool's built-in
controller stops the motor's output before the entire tool jerks.

Fast Drilling Speed Equivalent to an Electric (AC) Model

  • allows for fast change between the SDS-plus drill bit holder and the drill chuck holder (DH36DPC).

Note : Turn the change lever to "Hammering only" mode when replacing a tool retainer with another. Use the machine
only in "Rotation only" mode when the drill chuck holder installed.


Specifications

Model

DH36DPA

Capacity

Concrete

28mm (1-1/8")

Steel

13mm (1/2")

Wood

32mm (1-1/4")

Bit Shank

SDS-plus

Battery Voltage

36V

No Load Speed

0 - 1,100/min

Full Load Impact Rate

0 - 4,300/min

Overall Length

351mm (13-13/16")

Weight

3.9kg (8.6lbs.)

Vibration Total Values
(triax vector sum)

Hammer Drilling into Concrete

Vibration emission value ah, HD = 17.5 m/s2

Uncertainty K = 1.5 m/s2

Equivalent Chiseling Value

Vibration emission value ah, CHeq = 15.2 m/s2

Uncertainty K = 1.5 m/s2

Standard Accessories

2 Batteries (BSL36A18), Battery Cover, Charger (UC18YSL3), Side Handle, Depth Gauge, Terminal Cover, Carrying Case


  1. Weight according to EPTA-Procedure 01/2003.
  2. The vibration total values were determined according to EN60745.
  3. Supplied accessories vary by country or area.
Scroll To Top